This article explains what ISO17025 is and what it means to be accredited in ISO17025. Many will relate ISO17025 to national accreditation bodies such as A2La, DAKKS, UKAS, COFRAC, DANAK etc.
As an Example Eupry is accredited by the Danish accreditation body DANAK which is mutually recogniced by the US body A2LA both part of ILAC / MRA
What is ISO17025?
ISO 17025 is a set of requirements for testing and calibration laboratories who wish to show that their work complies with high technical and quality standards.
The ISO 17025 builds on the quality standard ISO9001, but with a set of technical requirements on top of the quality requirements.
If a company complies (and is accredited to) the requirements in ISO 17025, it is easy to have confidence to the calibrations that a laboratory performs. In many cases, an accredited calibration is required, as it is close to the only way of telling that a calibration has been performed with high quality standards.
Eupry’s ISO17025 accreditation
Eupry is accredited to the ISO17025:2005 standard by the Danish accreditation body DANAK for calibration, which means that Eupry has shown that we deliver high quality calibrations, which live up to the rigorous external scrutiny of DANAK. This means that you as a customer can be sure that every accredited calibration that Eupry delivers, lives up to the requirements of ISO17025:2005.
How to upgrade from traceable calibrations to iso17025 accredited calibrations
In reality is very easy to upgrade to an accredited laboratory, as the laboratory takes more responsibility. With Euprys service model, all products can be upgraded from traceable calibrations to accredited calibration, simply by contacting a Eupry sales representative.
What is the advantage of ISO17025 accredited calibrations
The advantage of choosing an accredited calibration over a traceable calibration, is that an accredited calibration is of the highest standard of calibration. This means that an auditor, or any other quality requirements, can never expect a higher level of confidence in the calibrations performed. In other words, an accredited calibration is of the highest standard possible, and through the external audits that an accredited laboratory has to go through, an independent third party has ensured that the calibrations performed live up the high quality standards that the ISO17025 requires. This in part means that an independent third party has ensured that a laboratory complies with high quality standards, and therefore it is not necessary to argue with external parties whether the performed calibrations are of high enough quality.
Who performs accredited ISO17025 calibrations
Through the accredited ISO17025 bodies such as A2LA, DAKKS, COFRAC, UKAS etc. it possible to locate companies that are able to perform accredited calibrations. Use selector on this page to find the bodies.
What is the difference between accreditation bodies such as NIST, UKAS, DAKKS, COFRAC, and DANAK
Each country has its own accreditation body or bodies, which accredit laboratories in each country to among others the ISO standard of calibration and testing. Through the international organisation for accreditation bodies ILAC, each body is peer reviewed through ILAC, and thus is recognized throughout the ILAC members.
This means that although a calibration certificate is issued by a laboratory accredited by a different accreditation body than the one in operating in a company’s country, it can be trusted through as much as if it has been issued by a laboratory accredited by an accreditation body in the company’s home country.
Can I use an accredited ISO17025 calibration from another country?
Generally an accredited calibration from another country can be accepted as much as a calibration from a company or organisation’s home country. Through the international organisation ILAC, most countries have signed the ILAC MRA (Mutual Recognition Agreement), which means that all the signatories of the ILAC MRA have agreed to recognise calibrations performed by accredited laboratories, which aids in assisting international trade and development throughout the world.
Although some countries have specific requirements or standards that go beyond the requirements in either the ISO17025 or other, for the vast majority, the requirements within calibration that an accreditation body audit a company to, are to such a high standard of quality that any local requirements are fulfilled.
How to use an ISO17025 accredited calibration from another country
When a company wishes to use a calibration certificate from a laboratory that has been accredited by an accreditation body other than the one in the company’s home country, it should refer to the ILAC MRA. If the company resides in a country that is a signatory of the ILAC MRA, the calibration certificate of that laboratory should be accepted on equal terms as if the calibration had been performed in the home country of the company or organisations.
If in doubt, the full list of ILAC MRA signatories can be found here: https://ilac.org/signatory-search/
How should an ISO17025 accredited calibration certificate look? // How do I identify an accredited calibration certificate.
There are several requirements for an ISO17025 accredited calibration certificate, and here a few of the most important requirements:
- Name and address of the laboratory that has performed the calibration
This is important to confirm that the calibration was performed at an accredited laboratory, and that it can be traced who performed the calibration.
- A unique calibration identification
Helps to ensure that the calibration can be traced, and that all data gathered during the calibration can be retrieved in case of any questions or subsequent analysis.
- Identification of calibrated device
This is important, as otherwise the certificate can not be verified as a certificate of calibration for a specific device.
- Date of calibration
The date the calibration was performed, is used to identify when the calibration is no longer valid, which is determined by governmental or internal quality requirements.
- Calibration results
The most important part of the calibration certificate, is what results were obtained. This should include the reference measurements, the measurements from the device under calibration and the deviation. Other results might be compliance with a stated MPE (Max Permissible Error) or desired calibration points.
- Calibration uncertainty
The uncertainty associated with a calibration tells a user how precisely the obtained results were to the best guess of the real value. In other terms, the uncertainty gives a number of how precise the calibration was performed. This should always be followed by a statement of the k value, which should be equal to 2 for all accredited calibrations.
How to perform an accredited calibration
- You are only able to perform an accredited calibration if you have been accredited by one of the ILAC MLA authorised bodies. However, it’s possible to perform a calibration by using a reference that has been calibrated by an accredited calibration laboratory. Have a look here on how to perform a traceable calibration of temperatures.
- In order to perform a traceable calibration read this following guideline
ISO 17025 accreditation
Companies that perform calibration in accordance with ISO17025 can choose to be accredited to the standard, which means that a national accreditation body ensures that all requirements in the ISO17025 are being followed, and that the laboratory has committed to continuously follow the standard and improve their work.
Even though there are national accreditation bodies, most of the worlds accreditation bodies participate in a mutual recognition agreement (MRA), which means that an accreditation in one country can be recognized in another country.
ISO 17025 requirements
Within the ISO 17025 standard there are several requirements to the work performed by a laboratory.
One of the key components is the expression of measurement uncertainty, which expresses how precisely a laboratory can perform a certain calibration. This is scrutinized by the accreditation body, and a customer of an accredited laboratory can therefore be confident that the uncertainty expressed on a calibration certificate is accurate and in accordance with high standards of quality.
Other key requirements are the pursuit to keep improving the quality of work, the requirement to inform customers of any deviations from agreed terms and results, and to only follow validated and tested calibration methods.
Recogniced ISO17025 bodies
Use the selector below to localize a recogniced body.